Dish option - Raven (Andrews) feedhorn
with Inverto C120 LNB
23mm to 40mm spacers included. In stock and ready for immediate shipping. Andrews feedhorn for
all Andrews offset dishes. works best with the 1.2m, 1.8m and 2.4m Andrews dishes. Highly recommended
with these dishes. Use this feedhorn with a C120 flange LNB for better matching & higher gain than a
40mm clamp LNB of equivalent noise level. Why buy a high quality Raven dish and use a compromise
40mm mass market LNB where the feed is made for
ANY dish?
Taking a 1.2m dish as an example - A 40mm LNB may only illuminate 1.1m of dish area or perhaps 1.3m
of dish area (i.e. including noise round the edges) but with a matched feedhorn, exactly 1.2m of dish
area is illuminated. This feedhorn is for offset dishes and can also be used on other makes of offset
dish. It comes with adapters for either 23mm or 40mm clamps and it comes with the ultimate 0.3 dB
Inverto LNB. The best combination money can buy. And YES !! We do have Raven feedhorns in stock.
Inverto LNBs are high output LNBs and work better than Invacom LNBs when the cable run is long.
(Under 20m the performance is the same but over 20m it is better)
This is a dish Option.
NO NOT buy from this page unless you are buying an Raven dish kit.
Include a matched Raven Feedhorn with C 120 Inverto 0.3dB LNB instead of a single 40mm LNB
Discounted option price. To buy this feed and LNB separately, go to the
Feedhorn page.
Add a Gibertini motorised 1.5m dish
with Titanium LNB and V Box.
This is the new Titanium third edition LNB that is widely praised on many web sites.
In the comparative LNB test in April 08 "What Satellite" magazine, this LNB performed best of all.
It has the gold connections and is very low noise. An ultimate performance LNB.
A polar mount, 18-inch actuator and a Technomate
V Box are also included.
This is a high gain offset motorised dish at a reasonable price.
A
free fitting kit with detailed instructions is included with all full motorised systems
included.
It is worthwhile checking out our
support page page (especially if you plan to do the fitting
yourself).
The dish uses a "Pole mount design". (i.e. fits on a 76mm diameter vertical pole). The ground stand is an optional extra.
This dish kit can be fitted to a 76mm (3") diameter pole, 1m high ground stand.
See
Wall mount and
ground stand
and see the
discounted ground stand below.
See the
Raven matched feedhorn options (with C120 LNBs) below.
Shipping options. Discounted shipping on all web orders.
UK - When you add a this dish kit to your receiver choice,
mainland UK delivery is still included in the price,
so choose "
Mainland UK delivery included" - UK shipping option No 1.
Or for "
UK offshore islands (and Eire) by courier" - oversized delivery - quote by e-mail (or ring us).
All internationals - Within the EU or outside of the EU - choose the "
International quote by e-mail"
shipping option.
Note that to most international EU destinations (including Eire,) delivery is about £80.00
Add a Gibertini 1.5m dish, polar mount, 18-inch actuator,
Titanium LNB, V Box
Order code AD15M36
Add only £499.95
System option. Add a 76mm 1m high ground stand to this system.
(Discounted.)
Manufactured by the Satellite Superstore.
This option is only available if you are buying the dish kit above.
For up to 1m dishes use three heavy duty feet. For 1.5m dishes use 6 feet (studs).
3 adjustable feet included. See additional feet below.
To buy this ground stand on it's own (not with a system) go to the
ground stand page
Order code OPTGR76
£124.95
Option. Additional 3 feet for the 3 inch stand above
Recommended when used with 1.2m dishes.
This discounted is an option (discounted price) when ordering a 3 inch ground stand.
To buy these feet on their own (not with a system) go to the
ground stand page
Manufactured by the Satellite Superstore. An exclusive high quality product.
Order code 3EXTRAF
Add £25.00 for 3 extra feet.
Add a heavy duty Raven 1.8m
motorised dish kit to my receiver.
Raven (Formerly andrews and before that Channel Master) 1.8m dish. Very high gain one piece proven design.
This motor unit is exclusive to the Satellite Superstore. Polar mount with aluminum adapter to fit
Raven (Andrews, Channel Master) 1.8m dish. Designed and built by the Satellite Superstore.
The polar mount picture above shows a standard 12 inch actuator but we include the HEAVY DUTY
18 inch actuator (also shown above) with this polar mount, - not the standard 12 inch.
The heavy duty actuator is, longer, thicker and much stronger.
The light-weigh (but very strong) aluminum adapter bracket fits onto the back of the Raven
1.8m dish. The adapter bracket is made of unequal box and uses aluminum welding with bracing
gussets. This gives maximum strength combined with lightness. The lightness puts less strain
on the polar mount. The complete motor kit is available separately on our The polar mount
with actuator and adapter are available on our
motors page
The polar mount collar fits a 3 inch (76mm) pole or ground stand.
Raven (Andrews, Channel Master) feedhorn. Highly recommended for Raven 1.8m dishes.
Using this feedhorn with a C120 flange LNB provides better matching & higher gain than a 40mm clamp LNB of
equivalent noise level. Why buy a high quality Raven dish and use a compromise
40mm mass market LNB where the feed is made for
ANY dish?
Taking a 1.8m dish as an example. A 40mm LNB may only illuminate 1.7m of dish area or perhaps 1.9m of dish area
(i.e. including noise round the edges) But with a matched feedhorn, exactly 1.8m of dish area is illuminated.
High output 0.3dB C120 Inverto LNB included (good for longer cable runs.) The highest gain 1.8m dish on the market.
(Has more gain than many 2.4m dishes) An ultimate system for enthusiasts.
V Box included.
UPDATE 2008. Continued improvements in the polar mount design. The bar between the actuator end and the
mount has now been upgraded to heavier, stiffer steel angle improving rigidity. (Not shown in earlier picture
above but the strengthened support arm is shown in a new picture to the right of the LNB.)
See the discounted
groundstand option below
You can change the single c120 LNB to a
twin,
a
quad,
or a
quatro C120 LNB with one of the options below.
Free fitting kit with detailed instructions included with all full motorised systems included.
It is worthwhile checking out our
support page page (especially if you plan to do the fitting
yourself)
Shipping options. Discounted shipping on all web orders.
UK - When you add a this dish kit to your receiver choice,
mainland UK delivery is still included in the price,
so choose "
Mainland UK delivery included" - UK shipping option No 1.
Or for "
UK offshore islands (and Eire) by courier" - oversized delivery - quote by e-mail (or ring us).
All internationals - Within the EU or outside of the EU - choose the "
International quote by e-mail"
shipping option.
Note that to most international EU destinations (including Eire,) delivery is about £225.00
Add a Raven (Andrews) 1.8m dish, polar mount, 18-inch H/D actuator,
feed and C120 LNB & V Box
Order code AD18M36
Add only £1179.95
1.8m motorised dish feedhorn options.
Raven feedhorn with Inverto C120 LNB options
If you are ordering the 1.8m dish where the matched feedhorn is included, or you are
ordering a feedhorn option to go with the 1.8m Raven dish, you may wish to change
the LNB from a single C120 LNB in your order option to a twin, a quad or a quatro LNB.
We can take out the single C120 LNB, change it and charge you the difference in price.
Feedhorn Option - Change the single C120 LNB for a twin Inverto C120 LNB.
Order code OPTC12T
ADD ONLY £12.00
Feedhorn Option - Change the single C120 LNB for a quad Inverto C120 LNB.
Order code OPTC12Q
ADD ONLY £27.00
Feedhorn Option - Change the single C120 LNB for a quatro Inverto C120 LNB.
Order code OPTC12M
ADD ONLY £27.00
1.8m dish option - Ground Stand
for the 1.8m motorised dish
Manufactured by the Satellite Superstore.
This is our own stand. It is 1.25m high and uses a
76mm (3.0") pole. Heavy 6mm thick angle is used along the base and the angle dimensions are 60mm by 60mm.
There are 12 holes for fixing down to concrete or paving. 4 in each angle. See bottom right picture.
It is etch-primed and pained black. The final coat of paint is baked in an oven dried.
The stand is bolted together to make it easy to ship. A fully welded stand of this size could not
be transported with a courier and would need a (expensive) haulage company, so this stand bolts
together. Multiple bolts are used for maximim rigidity. The stand is heavy but it needs to be.
This stand is designed for our motorised version of the 1.8m Raven dish.
Discounted price when you buy the 1.8m motorised dish kit.
Dish option. Ground Stand for the 1.8m Raven dish. 76mm
(3.0-inch) diameter pole
Order code OPT18GM
Add only £299.95
Ground Stand Option.
Adjustanble feet for motorised use.
This is an option (discounted price) when ordering a 76mm (3-inch) ground stand.
Feet are not included with the stand above. (To buy the feet without a ground stand see above.)
With the 1.8m stand above, for motorised use, to make the pole plumb, we would recommend at least 6 feet
and preferable 9 although up to 12 can be used. It will therefore be necessary to add this option more than once.
Manufactured by the Satellite Superstore. An exclusive high quality product.
Ground Stand OPTION. Add 3 feet to my 76mm, 3 inch 1.25m stand order.
Order code 3EXTRAF
Add £25.00 (per 3 feet)
Discounted wall mount option.
50mm Diameter South facing wall mount (T Mount).
480mm stand off.
This mount is ideal for use with the Technomate Diseqc motor.
This mount is not manufactured by Satellite Superstore (the heavy duty mounts are)
but it is one of the best mounts we have seen. Not as heavy duty as our own
but in all but the most exposed locations it will be fine. It is constructed with galvanised steel
It only uses 6 bolt holes and it is a strong low cost solution for most situations.
50mm (2") dia. mast. 480mm stand-off. Suitable for dishes up to 1.1m. 6 bolt fixing.
This is ideal for use with the Technomate diseqc motor in the motorised kits above.
If you are NOT adding this item to a motorised system (Or you need a heavy duty mount or ground stand)
then order from the
wall mounts and ground stands page. Note. THIS IS A SYSTEM OPTION ONLY
Shipping options. Discounted shipping on all web orders.
UK - When you add a this dish kit to your receiver choice,
mainland UK delivery is still included in the price,
so choose "
Mainland UK delivery included" - UK shipping option No 1.
Or the £15 "
UK offshore islands (and Eire) by courier" delivery - UK (and Eire) shipping option No 2.
International - Within the EU - Choose the £59 "
receiver and dish kit with wall mount to an EU destination" option.
International - outside of the EU - choose the "
International quote by e-mail" shipping option.
Dish kit or system option. 50mm Diameter south facing wall mount (T Mount).
Order code OPTTMOU
Add only £19.95 (Discounted)
Channel Data Programming options
Option. Astra 2 programming option.
Programming option. Astra 2 at 28E Digital receivers are normally empty of all channels.
You scan them in when you connect to the satellite. We can take the receiver out of the box,
connect it to a dish and tune in the satellite for only £11.95
If you are buying a complete system, this option also helps take some of the work
out of the system setting up process as to tune channels a dish first needs setting up.
The pre-programmed channels are useful to help set up the dish if you are using a budget meter.
You are not on satellite to scan the channels and you cannot find the satellite as there are no
channels scanned in to help you.
A programmed receiver breaks the circle and helps to set up and install a system.
Astra 2 plug in and use programming option
Order code PRO1SAT
Add only £11.75
Option. Astra 1 & Hotbird programming option.
Programming option. 28E and 13E. Digital receivers are normally empty of all channels.
You scan them in when you connect to the satellite. We can take the receiver out of the box,
connect it to a dish and tune in two satellites for only £11.95 We then move and arrange the
channels into a logical order. Some good free channels are moved to the start of each satellite.
Channels are moved into their packages. Adult channels are grouped together near the start of
the Hotbird. If you are buying a complete system, this option also helps take some of the work
out of the system setting up process as to tune channels a dish first needs setting up.
The pre-programmed channels are useful to help set up the dish if you are using a budget meter.
You are not on satellite to scan the channels and you cannot find the satellite as there are no
channels scanned in to help you.
A programmed receiver breaks the circle and helps to set up and install a system.
2 SAT plug in and use programming option
Order code PRO2SAT
Add only £11.95
Option. Astra 2, Astra 1 & Hotbird programming option.
Programming option. 28E, 19E and 13E. Digital receivers are normally empty of all channels.
Channels are scanned in when you connect the receiver to the satellite dish. We can take the
receiver out of the box, connect it to a dish and tune in three satellites for only £14.95. We
then move and arrange the channels into a logical order. Some good free channels are moved to
the start of each satellite. Channels are moved into their packages. Adult channels are grouped
together near the start of the Hotbird. If you are buying a complete system, this option also
helps take some of the work out of the system setting up process as to tune channels a dish
first needs setting up. The pre-programmed channels are useful to help set up the dish if you
are using a budget meter. You are not on satellite to scan the channels and you cannot find the
satellite as there are no channels scanned in to help you.
A programmed receiver breaks the circle and helps to set up and install a system.
3 SAT plug in and use programming option
Order code PR3SATE
Add only £14.95
Option. 28E, 19E, 16E & 13E programming option.
Programming option. 28E, 19E, 16E and Hotbird. Digital receivers are normally empty of all channels.
You scan them in when you connect to the satellite. We can take the receiver out of the box,
connect it to a dish and tune in 4 satellites for only £16.95 We then move and arrange the
channels into a logical order. Some good free channels are moved to the start of each satellite.
Channels are moved into their packages. Adult channels are grouped together near the start of
the Hotbird. If you are buying a complete system, this option also helps take some of the work
out of the system setting up process as to tune channels a dish first needs setting up.
The pre-programmed channels are useful to help set up the dish if you are using a budget meter.
You are not on satellite to scan the channels and you cannot find the satellite as there are no
channels scanned in to help you.
A programmed receiver breaks the circle and helps to set up and install a system.
2 SAT plug in and use programming option
Order code PR4SAT1
Add only £16.95
Option. 28E, 19E, 13E, 9E programming option.
Programming option. 28E, 19E, 9E and Hotbird. Digital receivers are normally empty of all channels.
You scan them in when you connect to the satellite. We can take the receiver out of the box,
connect it to a dish and tune in 4 satellites for only £16.95 We then move and arrange the
channels into a logical order. Some good free channels are moved to the start of each satellite.
Channels are moved into their packages. Adult channels are grouped together near the start of
the Hotbird. If you are buying a complete system, this option also helps take some of the work
out of the system setting up process as to tune channels a dish first needs setting up.
The pre-programmed channels are useful to help set up the dish if you are using a budget meter.
You are not on satellite to scan the channels and you cannot find the satellite as there are no
channels scanned in to help you.
A programmed receiver breaks the circle and helps to set up and install a system.
2 SAT plug in and use programming option
Order code PR4SAT2
Add only £16.95
Buying a fully loaded (programmed)
satellite receiver for motorised use.
This service is available for any motorised dish. If you are buying a system, or just a receiver
and you already have a motorised dish, we can take the receiver out of its box and fully program
it on one of our demonstration dishes. This would mean that the new programmed receiver can be
connected up by the customer and all the satellites channels will work straight away.
(Providing it is connected to a dish that is properly fitted, set up, and tracking the arc)
It would take a customer about many hours to program a receiver (since there would be
unfamiliarity with the installation menu system). After programming, the channels are then organised
in a logical order. (This is what takes the most time.) We make sure the first channel on every
satellite is a clear free to air unscrambled channel. Channels are organised into a logical order.
e.g. Adult channels all together etc. Movie packages .. etc. Moving all of the channels into a
logical order can take days. This programming is ONLY £19.95 This service is entirely optional
but for mail order customers it can take a great deal of the worry and uncertainty out of a
purchase. The programmed receiver is supplied without dish positions to be used with any dish.
Only the positions and the limits need to be added. This is a 10 minute job. This option is
ideal if you are buying a full motorised system and you intend to fit it yourself.
This option helps a great deal. It also makes it easier to install a motorised dish as channels
already loaded can help identify the satellite if a budget satellite meter is being used. Detailed
installation notes written by us are included and we can talk you through the installation
over the phone if required. See our support package on our
support page.
Our notes guide you through how to connect a programmed receiver, and setting the positions.
In addition, useful easy to follow notes on blind searching written by us are included for
future reference. For international orders, this option has one other worthwhile purpose.
The receiver is fully tested before shipping while it is being programmed.
Motorised receiver full programming option
Order code MOTPROG
Add only £19.95
LNB Upgrades.
These options are for standard dishes (including clear dishes) not Sky mini dishes.
Change the single LNB to a different make
(Please note that we can't put a zero into the shopping cart so the option is charged at 1p)
This is a system option where we take out one LNB and substitute in a different one.
If you want to buy this LNB but you are not buying a system as well, DO NOT add to cart.
The LNB must be bought from the
LNB page at the correct price. These are system options.
Change my LNB from the one quoted in my system to an Titanium single LNB
Order code OPTTIRM
£00.01
Change my LNB from the one quoted in my system to a Technomate LNB
Order code OPTCHTE
£00.01
Upgrade a single LNB to 0.1dB twin LNB
Titanium or Technomate - ultimate performance LNBs.
(e.g. Sky Digibox or freesat option.)
For use with multiple receivers on one fixed dish
Also for a multibracket option
If the twin LNB option is to be used with the 3 or 4 multibracket LNB dish kits,
(e.g. Sky Plus or freesat twin tuner option.)
If you want to run a Sky Plus / HD or a Freesat receiver using the one dish fitted
with a Triax multibracket kit you need to add this option. The normal receiver will pick up the
signal from the Astra 1 and Hotbird LNB and one output from the twin (4 output) LNB. This will all go
through the switch down one cable to the receiver. The second output of the twin LNB
can go down a second cable to the Sky or Freesat box. The two receiver can then be watched on
(e.g.) AV 1 and AV 2 (or e.g. channel 7 and 8) on the TV. This puts both systems onto
one dish.
System option - Include a Technomate 0.1dB LNB twin output LNB
instead of the LNB with my system.
Order code OPT0TTW
Add only £10.00
System option - Include a Titanium 0.1dB LNB twin output LNB
instead of the LNB with my system.
Order code OPT05TW
Add only £10.00
Upgrade a single LNB to a QUAD 0.1dB LNB
Titanium or Technomate - ultimate performance LNBs.
(e.g. Sky Plus / HD or freesat HDR twin tuner option.)
For use with multiple receivers on one fixed dish
Also for a Traix multibracket option
If the quad LNB option is to be used with the 3 or 4 multiconnect LNB dish kits and
you want to run a Sky Plus / HD or a Freesat receiver using the one dish fitted
with a Triax multibracket kit you need to add this option. The normal receiver will pick up
the signal from the Astra 1 and Hotbird LNB and one output from the quad (4 output) LNB. This will
all go through the switch down one cable to the receiver. The third and third outputs of the quad LNB
can go down two more cables to the Sky or Freesat box. The two receiver can then be watched on
(e.g.) AV 1 and AV 2 (or e.g. channel 7 and 8) on the TV. This puts both systems onto
one dish.
System option - Include a Titanium 0.1dB quad LNB
instead of the LNB with my system.
Order code OPT02QU
Add only £28.00
System option - Include a Technomate 0.1dB quad LNB
instead of the LNB with my system.
Order code OPTT2QU
Add only £28.00
Upgrade a single LNB to a QUATRO LNB
These are the new Titanium third edition 0.1dB LNBs that are widely praised on many web sites.
The third edition has the gold connections and is very low noise. An ultimate performance LNB.
Dish kit option. - Include a Titanium 0.1dB Quatro LNB instead of the single LNB with my system.
Quatro LNBs are used to provide satellite signals to multiswitches
System option - Include a Titanium quatro LNB instead of the single LNB with my dish or system.
System option - Include a Titanium 0.1dB quatro LNB
instead of the LNB with my system.
Order code OPT01QT
Add only £28.00
Upgrade a single LNB to a Octo Technomate 0.1dB LNB
High sensitivity range. For use with multiple receivers on one fixed dish. Also for a multibracket option
If the Octo LNB option is to be used with the 2 sat Triax multibracket LNB dish kit and
you want to run several receivers including a Sky Plus / HD or a Freesat receiver using the one
dish fitted with a Triax multibracket kit you need to add this option. The normal receiver will pick
up the signal from the Astra 1 and Hotbird LNB and one output from the Octo (8 output) LNB. This will
all go through the switch down one cable to the receiver. Other outputs of the Octo LNB
can go down more cables to the extar Sky or Freesat receivers. This puts many systems onto one dish.
System option - Include a Technomate 0.1dB Octo LNB
instead of the LNB with my system.
Order code OPT02OC
Add only £53.00
Long pole "above the gutter" wall
mounts for fixed dishes up to 1.0m
5 bolt fixing. Various stand off distances and 2 pole lengths - 1m and 2m. All pole diameters are 50mm
The poles are galvanised. the stand off distance is from the wall is to the inside of the pole.
If the dish is larger than 1.0m use a heavy duty "above the gutter" wall mount from our
wall mounts & ground stands page or a ground stand if applicable.
The following mounts are available from the
Wall mounts & ground stands page,
Long pole wall mount 1. Stand off - 300mm. 2m galvanised pole.
Order code LPMOUN1
Long pole wall mount 2. Stand off - 500mm. 2m galvanised pole.
Order code LPMOUN2
Long pole wall mount 3. Stand off - 300mm. 1m galvanised pole.
Order code LPMOUN3
Long pole wall mount 4. Stand off - 500mm. 1m galvanised pole.
Order code LPMOUN4
(All prices on this page include VAT.)
Links to site pages,
Advice
Support
Shipping info
Multiswitches
Satellite Museum
Reviews
Links
Satellite Finder Meters
Contact Us
SKY receivers & systems
SKY accessories
Other accessories
Installation equipment
Wall mounts & ground stands
Dishes
Transparent dishes
Full systems
Motorised systems.
2, 3 or 4 satellites on 1 fixed dish
BBC systems
Linux receivers
freesat receivers
Blind search receivers
Receivers with hard drives
Twin tuner PVR receivers
High Definition Receivers
Manhattan
Cube Revo
Icecrypt
Dreambox
Technomate
Humax
Analogue Receiver
More receivers
Caravan products
Diseqc switches
LNBs
Feedhorns
Motors
V Box
Positioners
Adult cards
CAMs
All products index
Links to menu pages,
Catalogue Contents Page. A summary of all pages. More products.
ADVICE Pages. Frequently Asked Questions. (FAQs) Read and learn!
Menu pages.
Sky menu page.
Satellite systems menu page.
Satellite receivers menu page.
Satellite dishes
Clear transparent dishes
High definition receivers menu page.
LNB (and feedhorns) menu page.
Motorised systems menu page.
Enthusiast blind search receiver menu page.
Manhattan menu page.
Humax menu page.
Technomate menu page.
Topfield receivers menu page.
Dreambox receivers menu page.
Pace receivers menu page.
Triax dishes, LNBs & brackets menu page.
Mutiswitches menu page.
3/4 satellite fixed dish menu page.
Small satellite items menu page.
Audio video products
Satellite Meters menu page.
Caravan Satellite menu page.
Accessories menu page.
Installation equipment menu page.
Review centre menu page.
Index of all products menu page.
Links to pages with more detail,
Catalogue Contents Page. A summary of all pages. More products.
ADVICE Pages. Frequently Asked Questions. (FAQs) Read and learn!
Freesat and Sky.
Freesat receivers / systems / mini dishes / accessories. The Humax HDR. The Segam.
The Sky Digital receivers / systems / mini dishes / accessories. The Pace DS440N. The Sky Plus.
Sky Digital accessories handsets, TV eyes, distribution around the house, wireless, offers, leads,
etc.
Sky Digital dishes and LNBs single, twin & 4 out LNBs, Zones 1 & 2 mini dishes & larger dishes.
Freesat and Sky in Spain. 1.0m, 1.2m, 1.8m and 2.4m dishes for Spain. Satellite meters for Spain.
Satellite Systems, Complete systems menu page
Sky systems.
Motorised systems.
(motors)
Hotbird 13E systems
(2 satellite) Astra 1 & Hotbird systems
(3/4 satellite) Astra 2, Astra 1 & Hotbird etc. systems.
God channel 28E systems
Free to air 28E BBC systems
Sky systems.
Sky + systems.
Adult channel systems
Manhattan motorised systems.
Icecrypt motorised systems.
Dreambox motorised.
Technomate satellite systems.
Satellite receivers,
Receiver menu page.
Sky Digital receivers
Freesat receivers
Blind search
Sky menu page
Sky Digiboxes
Sky Digibox.
Sky Plus.
Sky HD.
Caravan receivers
Technomate TM5200
TM5400
TM5300
TM5500.
TM9100
TM6900 HD Super.
TM6800 HD Super
TM7100.
Manhattan Plaza XT-M, XT-CM
SAB500Gb Twin Tuner
Brand new Analogue Receivers
Linux receivers
Cube Revo
Dreambox 600 800 8000
TM9100
PVR hard drive receivers or PVR ready
High Definition receivers menu page.
Humax iChord Twin Tuner PVR
Cube Revo Linux twin tuner PVR.
Technomate TM-6900 Super.
Technomate TM-6800 Super
Technomate TM-7100
Icecrypt S4000.
External USB hard drive for usb receivers
Vantage HD 8000
Dreambox 800
Freesat HD Receivers
Satellite dishes,
Dish menu page
LNB menu page
Sky dishes
Wall mounts
& stands
Feedhorns
FIXED,
Sky
Triax 54, 60,80,90cm,1.1m
Orbital 1.0m
Andrews 1.0m 1.2m,1.8m, 2.4m
Clear Transparent 60,85cm
MOTORISED,
Triax 80, 90cm,
Transparent 85cm
Orbital 1.0m
Andrews 1.0m, 1.2m, 1.8m
OTHER,
Sky mini dishes
All-weather Sky dishes
Sky dishes for Spain
3/4 satellite dishes
Dish motors
Caravan dishes
Terrestrial PVR receivers,
Topfield TF5810
Humax
Satellite & Terrestrial,
Technomate TM-6900 HD Combo.
Technomate TM-7100.
Brand New Analogue Satellite Receivers
(e.g. Could be used on Astra 1 to see Eurosport in English!)
Sky menu page
Adult Cards
CAMs
freesat receivers
LNBs
Monobocks
LNBs
Feedhorns
Sky accessories
Other Accessories
Installation equipment
Satellite Meters
Caravan
AV products.
Contacting us.
Tel. (UK) 01207 544664 and 01207
544224
International Tel. + 44 1207 544664.
If you are ringing us about a product you have already purchased, you should ring the support line on your invoice.
Before sending questions via e-mail please check-out our
Frequently asked questions as this could save
time.
If you have any questions & comments regarding this site's content, please ....
contact us by e-mail.
(We only accept questions in English (no text language). We do not open attachments.)
Questions about faults or returns must include an invoice number or order number & date of purchase.
Technical questions are not a problem but questions about "channels" should be checked out first with
the satellite providers. Links to the satellite providers web sites are on our
Links Page
Copyright © 2010 Vision International. All rights reserved.
