United Kingdom
accepted cards
13 input (3 satellite) multiswitches at the Satellite Superstore UK. 8-way, 12-way 16-way EMP-Centauri multiswitches. 5 input multiswitches, 9 input multiswitches, 13 input multiswitches, 17 input multiswitches, amps, splitters, 5X8 multiswitch, 5X12 multiswitch, 5X16 multiswitch, 5X24 multiswitch, 5X32 multiswitch, 9X8 multiswitch, 9X12 multiswitch, 9X16 multiswitch, 13X8 multiswitch, 13X12 multiswitch, 13X16 multiswitch, 17X8 multiswitch, 17X12 multiswitch. 17X32 multiswitch. Dishes with quatro LNBs. Diplexing outlet plates. Triplexing outlet plates. EMP-Centauri.
We have 2 identical sites on different servers. www.satellitesuperstore.com & www.satellitesuperstore.co.uk If one site is down, please use the other one
Satellite Museum
Shipping info
  Contact Us
  Wall outlet plates
  Installation equipment  
  Wall mounts & ground stands  
  Satellite finder meters  
Sky receivers
  French TV
  Italian TV
  All receivers
  Adult cards
TV, FM and DAB Aerials
Freesat receivers
Twin tuner PVRs
  Linux receivers
Motorised systems
Fixed Dishes
Motorised dishes  
SuperJack Actuators  
2,3 or 4 satellites on 1 fixed dish
 V box
Caravan products
 All products
C Band

As a family based company we offer telephone sales and advice. Tel. 01207 544664

5 input (1Sat). 9 input (2 sat) 13 input (3 sat) 17 input (4 sat) amps splitters Dishes with quatro LNBs 4 LNB cable
EMP-Centauri 13 input (3 sat) multiswitches.
Professional Range.

EMP-Centauri 13 input, 12 output multiswitch EMP-Centauri 13 input, 40 output multiswitch

These multiswitches work from a quatro, quad or octo LNBs. Manufactured in the EU.
This is the "Professional Range" from EMP-Centauri. High build quality. All multiswitches have gain controls on all inputs so that
levels can be balanced if required. (The economy range does not have adjustable gain. We only sell the professional range). The
specifications are impressive, Terr 40-862 MHz active (built in amp) 5-862 MHz passive (switchable). SAT 950-2300 MHz. Isolation
between inputs 20dB. (Instructions included). Power consumption 3W terr passive and 5W terr active. SAT gain 15dB adjustable.
The professional range is built in the EU to high standards of reliability. They even include instructions! (Most multiswitches don't).
General information -
The three satellite feeds could come from three dishes, or one fixed dish with three LNBs held on a bracket. (The three LNBs on
a bracket option works well if the satellites are close together, typically with no more than 20 degrees of separation). This type
of system is ideal for customers requiring (e.g.) the main UK channels from one satellite and a range of international channels
from two other satellites. e.g. UK channels from Astra 2 at 28E (freesat or Sky) and international channels from the Hotbird at
13E and Astra 1 at 19E. Within the property, home, hotel, office etc. multiple satellite points can be fitted. One or more points
in every room provides access to all three satellites depending on which type of satellite receiver (set top box) or TV with built
in satellite is to be used in that area. 13 input multiswitches are ideal for providing multiple satellite points in homes,
apartments, rooms or offices from one - three fixed dishes. They can be used in both commercial and domestic applications.
Many private customers now choose to have satellite points in every room in the same way as mains outlets or network / internet
points. Fitting a satellite provision in every room means that multiple receivers can be used or receivers can be carried from
one room to another if required. Multiswitches are used in hotels to provide many TV channels for guests in their rooms. Schools,
colleges and commercial buildings all use multiswitches. The options are, 8, 12 16 and 26 outputs. These are probably the only
13 input multiswitch available in the UK that offer quad, and octo LNB capability. Usually UK dealers only offer 5 and 9 input
multiswitches of any type. These multiswitchers also have a terrestrial input. The terrestrial signal is encoded onto the satellite
cable and can be accessed using the correct type of wall plate. If 3 aerials need to be fed into the multiswitch, TV, FM and DAB,
they can be combined using a combiner and then the one output of the combiner feeds into the terrestrial input of
the multiswitch. Again the aerials are accessed in the rooms with an appropriate wall plate.

Shipping options. Discounted shipping on all web orders.
UK - mainland UK delivery is included in the price, (VAT info.) (Stock levels.)
so choose "Mainland UK delivery included" - UK shipping option No 1 (or priority options 4-7).
For "UK offshore islands including Northern Ireland" many items including dishes up to 1.0m choose the 15 - UK option No 2.
International - Republic of Ireland - choose the 15 "fixed price multiple items to Eire" shipping option
International - within the EU - choose the 38 "up to 5Kg by courier to EU countries" shipping option
International - outside of the EU - choose the "International shipping quote by e-mail" shipping option.
Please note, although not guaranteed, many 1-3 day standard UK deliveries are actually arriving next day if the order
is received before our cut-off times but there is also a next day priority delivery option at only 6.50 if required

13 in and 8 out (13X8) multiswitch. EMP-Centauri MS13/8PIU (Profi Class)
Powered multiswitch. Built in power supply. Plug into 220/240 volts.
Order code EMP13X8
Price on application

13 in and 12 out (13X12) multiswitch. EMP-Centauri MS13/12PIU (Profi Class)
Powered multiswitch. Built in power supply. Plug into 220/240 volts.
Order code EM13X12
Price on application

13 in and 16 out (13X16) multiswitch. EMP-Centauri MS13/16PIU (Profi Class)
Powered multiswitch. Built in power supply. Plug into 220/240 volts.
Order code EM13X16
Price on application

13 in and 26 out (13X26) multiswitch. EMP-Centauri MS13/26PIU (Profi Class)
Powered multiswitch. Built in power supply. Plug into 220/240 volts.
Order code EM13X26
Price on application

EMP-Centauri 13 input, 40 output multiswitch EMP-Centauri 13 input, 40 output multiswitch

13 in and 40 out powered multiswitch. EMP Centauri MS 13/40 EEU-14. New.
In stock.
Powered multiswitch. External PSU. Plug into 220/240 volts. Please note - this multiswitch only works with quatro LNBs
Order code EMP13X40
Price on application



I want to have multiple satellite points around
the house and multiple receivers. I also want to
distrubute the TV from one receiver to all TVs how
can this be done.


There are two parts to this question.


To provide many Sky or freesat dish points around the house you either need a quatro LNB on your
dish or a quatro LNB dish kit. see dishes with quatro LNBs
and a 5 input multiswitch (multiswitches are usually situated in a loft or cupboard or central area.)
see multiswitches
The quatro LNB (with 4 outputs) feeds the multiswitch using 4 LNB cable - see 4 LNB cable
Best to put two outlets in each room as it may be that twin tuner receivers
(record one channel and watch another) may be needed.
If so use the twin wall plates see outlet plates then scroll down to the twin units.
Use twin cable to each room. see Twin cable
For (e.g.) 6 rooms a 12 output multiswitch would be used. Twin cable to each room.
An aerial can be fed into the 5th input of the multiswitch if required.
Using a wall plate which has a diplexer built in, two satellite points and an aerial point is available.
The UHF Aerial signal is added to the satellite signal by the multiswitch and goes down the
same wire as the satellite signal.
If two or three aerials are required e.g. TV, FM and DAB radio, a 3 way combiner can be fitted on the roof and
the one cable from that unit goes into the 5th input of the multiswitch. Again the appropriate wall plate is
needed to separate them all out again. see multiswitch combiner
Standard Sky, Sky+ Sky HD freesat and freesat HDR and other receivers can then be connected
to the F connector wall plate.


distribution round the house needs a 2, 3, 4, 6 amp or (preferably) professional 8 way amp and cabling.
see Professional 8 way amp and Offer 1
but read the whole page.
This is to distribute TV from one receiver to other TVs around the house (one channel)
This can be done by feeding a cable from the room containing the sat receiver to the multiswitch location and
into the 3 way combiner then into the multiswitch.
However, the problem with this method is that the multiswitch will not permit the 9 volts to go through and
the TV Eye or omni link system to work for control.
It is better therefore to have a completely separate output system with separate cabling for the distribution system
This would mean 3 cables to each room, two for the satellite and one for the distribution. TV eyes for Sky receivers
Sky accessories
or omni link systems for freesat receivers etc.
see omni link kit
(and a modulator is required - same page)
This will allow full control of the Sky or freesat system from all of the rooms.

How to use mutiswitches and motorised in multiple rooms.
Using a 9 input Delta multiswitch, two satellites can be made available in every room.
This multiswitch could be fed from (e.g.) a dish on 28E for sky or freesat. This dish would have a quad
(not quatro) LNB. These multiswitches are designed for quad or octo LNBs.
A good example of a dish for this purpose would be -
The Triax 60cm solid dish with quad option
see Triax 60cm. (with quad LNB option)
The Triax heavy duty 60cm or 70cm dish with quad LNB option
see Triax heavy duty 60cm or 70cm dishes (with quad LNB option)
The clear 60cm dish with quad LNB option.
see Clear 60cm dish (with quad LNB option)
This dish would be fed into input 1 of the 9 input multiswitch (this is 4 inputs), 1-4, for the quad LNB.
Input 2 (i.e. from 5-8) would be fed by a motorised dish.
The motorised dish (e.g. 90cm Triax - see Triax 90cm motorised dish (with octo LNB option))
would have an octo LNB option (8 outputs)
4 of the outputs would feed into input 2 of the multiswitch (5-8)
A 5th output would go direct to the motorised satellite receiver. (or outputs 5 and 6 to a twin tuner motorised receiver.)
This receiver would be placed in the house where it can easily be accessed as it will control which 2nd satellite
it being offered to the multiswitch.
Let us assume the 9 input multiswitch has 16 outputs. That is to say twin cable to 8 rooms so that every room has
the capability of using a twin tuner receiver.

The system would then work in the following way -
Using any receiver into a twin satellite point in a room, 28E (Sky and freesat) would be available even if the
receiver was a dedicated receiver (like a Sky receiver) and does not have Diseqc switching PROVIDING 28E goes
into input 1 of the multiswitch.
Input 1 is the "relaxed position" of the switches (Input 2 is the forced position) therefore the signal will go
through input 1 whether the receiver has Diseqc switching or not.

If the receiver DOES have diseqc switching, then the second satellite can be selected.
If the motorised dish is (e.g.) on Hotbird, the second satellite available in every room would be Hotbird at 13E
If the motorised dish is (e.g.) on Astra 1, the second satellite available in every room would be Astra 1 at 19E
this system insures that everyone in the house can easily select the main UK satellite (Astra 2 at 28E) but would
also be able to access a second satellite and that satellite would be determined by the position of the motorised dish.
This system eliminated a particular problem. Within the menu of a satellite receiver you can't select Diseqc
switching (Diseqc 1.0 or 1.1) AND motorised (Diseqc 1.2) AT THE SAME TIME. This is why an octo LNB must be
used with these special quad / octo multiswitches. This system keeps the diseqc 1.2 separate from the
multiswitches and so it all works. It would not work with quato LNBs as the motor would not work between the
LNB and the multiswitch. There has to be a 5th output
to separately route through the motor to a control receiver.

Twin wall plates are needed in every room. The motorised receiver needs it's own cables directly from it's own dish.

This system also works for a 36 volt motor, here a V Box is used in the cable from the 5th output of the octo LNB
to the main motorised control receiver otherwise everything else is the same.

(All prices on this web site include VAT.)

Links to menu pages,

Catalogue Contents Page. A summary of all pages. More products.
ADVICE Pages. Frequently Asked Questions. (FAQs) Read and learn!

Menu pages.

Satellite receivers menu page.
Fixed satellite dishes menu page.
Motorised satellite dishes menu page.
2, 3 or 4 satellite on a fixed dish menu page.
Clear transparent dishes menu page.
Motorised satellite systems menu page.
V Box menu page.
Satellite dish motors menu page.
Satellite systems menu page.
Caravan / Motorhome / RV Satellite menu page.

Ku, Ka, Universal and programmable LNBs menu page.
feedhorns menu page.
C Band LNBs and feedhorns menu page.

Vu+ receivers menu page.
Freesat receivers menu page.
Humax receivers menu page.
Sky receivers menu page.
Sky accessories menu page.
Technomate receivers menu page.
French TV and Italian TV receivers menu page.
Edision receivers menu page.
Technisat receivers menu page.
Sab receivers menu page.
Twin tuner receivers menu page.
High definition receivers menu page.
Linux receivers menu page.

Multiswitches menu page.

Satellite finder meters menu page.
Wall mounts and ground stands menu page.
Installation equipment menu page.
Cable menu page.
Diseqc switches and motors menu page.

Optical LNBs and equipment menu page.
Satellite accessories menu page.
TV, FM and DAB aerials menu page.
cams menu page.
adult cards menu page.
Index of all products menu page.

See our other web site at- www.primesat.eu

This site includes many products that are exclusive to the Satellite Superstore.
The site contains -
Products that we manufacture (e.g. We have manufactured heavy duty wall mounts and ground stands since 1991).
Selected products which have our own Primesat brand name and have been prepared to our specifications.
Selected products where we have been appointed the authorised UK or European distributor by the manufacturer.
www.primesat.eu is an information site. Here you will find full specifications and many detailed pictures.
To buy any of these products, simply order them on this web site.

Link to our own satellite museum site

Satellite Museum. A museum of vintage satellite receivers.

Satcom 7700 satellite receiver.

For old satellite receivers with knobs on and read about "A History Of Satellite TV".

Also see www.rewindmuseum.com. A Museum of vintage consumer electronics.
Vintage reel to reel video recorders. Vintage VHS and Betamax VCRs. Vintage video cameras. Vintage
Laser Disc. Vintage Computers. Old telephones. Old brick mobile phones. Vintage Hi Fi, Old reel
to reel audio and early audio cassette decks. Including, the history time line of vintage
consumer electronics ... and much more .....

Sony 2400 portable reel to reel video

It is well worth a visit.
Only The Satellite Superstore brings you
great products, advice and it's own museum.

Rewind Museum

You may be interested in two other web sites.

Hard tonneau cover for the 1947-53 Chevy truck. Hard tonneau cover for the 1947-53 Chevy truck.

This web site shows all of the restoration process and the modifications to this truck.
In addition, there is a hard high quality tonneau cover on a new web site
at www.classictonneaucover.com for the 1947-53 Chevy truck.


Contacting us.
Unlike many other companies we are happy to answer questions on the phone.
Tel. (UK) 01207 544664 and 01207 544224
International Tel. + 44 1207 544664.
Before sending questions via e-mail please check-out our Frequently Asked Questions as this could save time.
If you have any questions & comments regarding this site's content, or you need advice please ....
click here to go to our contact forms.

Copyright © 2019 Vision International. All rights reserved.