As an online family based company we are still able to send goods
out daily. Order online or on the phone. Tel. 01207 544664

Inclined orbit motorised satellite dishes - Raven 1.2m. Raven 1.8m. Raven 2.4m.

Raven 2.4m inclined orbit motorised dish.







Raven 2.4m dish with inclined orbit polar mount using two actuators.
Heavy duty Raven 2.4m dish with inclined orbit polar mount, Raven matched feedhorn and c120 Inverto single LNB.
The 36 inch heavy duty actuator can go on either side. The 12 inch heavy duty actuator is for up and down adjustment. This is
ideal for tracking inclined orbit satellites. Two positioners are needed. These can be a Primesat V Box for control east and
west using a modern HD satellite receiver in automatic mode or in manual mode and up and down using the 2nd V Box
positioner. Manual mode would be using the handsets which came with the positioners. All satellite positions can be stored. For
inclined orbit satellites a timing chart is useful (ring us for further advice). The inclined orbit motor kit is available separately.
About the motor unit - This motor unit is produced by our sister company www.primesat.eu for the Satellite Superstore.
It is designed for the 2.4m Raven dish. The "dish back plate frame" is etch primed, primed, top coated and baked in an
oven to provide a durable finish. The rest of the polar mount including the collar is dipped galvanised. All of the nuts
and bolts are made of stainless steel except the main elevation adjuster which are made of brass. The polar mount includes
a frame which is designed to fit on the back of the Raven 2.4m dish using the 4 bolts which come with the Raven dish.
Technical - Gain 47.6 dBi at 11.95Ghz. 3dB beamwidth - 0.7 degrees. Cross polarisation - 30dB, collar fits a 100mm pole.
Weight of polar mount 29Kg. Weight of actuators 12Kg. Total weight 41Kg. This polar mount motor unit is designed to
clamp onto a 100mm diameter pole. An ideal ground stand is the Primesat GS76125 stand. Note - Raven dishes were
formally "Andrews dishes" and before that "Channel Master". This heavy duty polar mount and actuators can take high wind
loads. Using a Diseqc receiver, an optional V Box is also needed. This converts Diseqc commands to 36-volt positioning and
is fully automatic. it also introduces more power to drive the heavy duty 36 volt motor east and west.
Two discounted V Box are avaiable below. A matched Raven feedhorn is highly recommended and
included with this Raven 2.4m dish kit. Using this feedhorn with a C120 flange LNB provides better matching and more good
signal (a higher signal to noise ratio) than a standard 40mm clamp LNB. It is best not to invest in a high quality Raven
dish and use a compromise 40mm mass market LNB where the integrated feedhorn is designed for ANY dish but is not
matched? Taking this 2.4m dish as an example, a 40mm LNB may only illuminate 2.3m of dish area or perhaps 2.5m of dish
area (i.e. including noise from round the edges) but with a matched feedhorn, exactly 2.4m of dish area is illuminated.
A high output C120 Inverto LNB included (good for longer cable runs). The one piece reflector is thermoset-molded glass
fiber reinforced polyester for strength and rigidity and surface accuracy. An ultimate dish system for enthusiasts. The
polar mount collar fits an 80mm pole or ground stand. Also see the discounted heavy duty ground stand option below.
Spare parts are available for the Raven dish - fixed AZEL mount, spare arms, and the feed support boss. You can
change the single c120 LNB to a twin, a quad, or a quatro C120 LNB with one of the LNB options below.
4 core motor control cable for these motors is available. If you already have a 4.5" pole, a pole adapter is available.
Note - a standard motorised version of this dish is also available. A C Band LNB support boss / bracket. is also available.

Shipping options. Shipping to all destinations is by quotation. email or ring.

Raven 2.4m inclined orbit dish, polar mount, heavy duty 36 inch
actuator, 12 inch actuator, feed, C120 single Inverto LNB.
Order code RAV24IO
£4249.95

2 positioners option. - add 2 x V Boxes to my dish order.
Discounted V Box. Normal price £99.95 each - we are only adding £79.95 extra for each V Box. Save £40.00
Order code OPTVPRI
Add only £159.90

LNB options



When ordering the dish above which includes a matched feedhorn you may wish to change
the LNB from a single C120 LNB in your order option to a twin, a quad or a quatro LNB.
We can take out the single C120 LNB, change it and charge you the difference in price.
Buying these LNBs separately without also buying the dish kit should only be done from the LNB page.

Dish Option - Change the single C120 LNB for a twin Inverto Black Pro C120 LNB.
Order code OPTETWI
Add £30.00

Dish Option - Change the single C120 LNB for a Primesat quad C120 LNB.
Order code OPTPQCN2
Add £200.00

Dish Option - Change the single C120 LNB for a Primesat quatro C120 LNB.
Order code OPTPQCM2
Add £200.00